HIPPO Truck Mounted E-Models

Overview
Designed to provide you with all the power you need, wherever you need it, HIPPO E-Models are truck mounted and don’t add idle hours to your truck’s engine. Each unit is self-sufficient—incorporating its own diesel engine to provide hydraulic, air, electric and welding power wherever you need it. The addition of an E-Model to your truck allows you to operate your HIPPO Multipower unit in states with even the most stringent engine idle laws. Need power in tunnels, mines or other confined areas? No problem with our diesel-powered HIPPO E-Models.

Power Plant
A complete mobile power resource, the HIPPO Power Plant delivers four types of power from a single, highly efficient unit. Aberdeen Proving Ground tested and approved engineering and components, the Power Plant will perform in all severe duty applications.

Hurricane
Need more air? We’ve got it. The HIPPO Hurricane takes the output of the Power Plant up one notch by delivering 100 cfm of air! No more busting your knuckles hitching up the pull behind compressor—the HIPPO Hurricane has the air power you need and then some.

Power Pack
Don’t need hydraulic power? No problem. The HIPPO Power Pack is a smaller unit designed for truck mounted applications. Built with the same robust engineering HIPPO is known for, the Power Pack provides air, electric and welding from the bed of your truck.

Power Pack Plus
If you’re looking for a more compact unit with hydraulic power, the Power Pack Plus is the best choice for truck mounted applications that require hydraulic, air, electric and welding power anywhere, any time.

Ideal For: Municipalities | Railroads | DOT | Maintenance Vehicles | Contractors

Financing Options

Model Engine Hydraulic Air Electric* Welding* Simultaneous Tool Circuits Battery Charger Jump Starter Hose Reels
E-Model Power Plant 35 HP liquid-cooled diesel 2 each 10 gpm @ 2,000 psi 45 cfm @ 100 psi 6 kVA single phase 120/240 vac 8.5 kVA 3 phase 240 vac 250 amp DC any two 12/24/36/48 volt 400 amp @ 13 VDC optional, hydraulic or air
E-Model Hurricane 44 HP liquid-cooled diesel 2 each 10 gpm @ 2,000 psi integral crane circuit 50/100 cfm @ 100 psi 100 CFM in isolation 6 kVA single phase 120/240 vac 8.5 kVA 3 phase 240 vac 250 amp DC any two 12/24/36/48 volt 400 amp @ 13 VDC optional, hydraulic or air
E-Model Power Pack 24.8 HP liquid-cooled diesel N/A 45 cfm @ 100 psi 5.2 kVA 120 vac 240 amp DC 45 cfm @ 100 psi plus 120 amp DC welding N/A N/A optional, hydraulic or air
E-Model Power Pack Plus 24.8 HP liquid-cooled diesel 1 each 10 gpm @ 2,000 psi 45 cfm @ 100 psi 5.2 kVA 120 vac 240 amp DC 45 cfm @ 100 psi plus 120 amp DC welding N/A N/A optional, hydraulic or air

*Higher output generators and/or welder/generators available

Ready to see the HIPPO Truck Mounted E-Models in action? Contact us today to set up a demo.